Description
TVN V302 Dynamic Triple Function Air Release Valve is a unique valve operating without a float, utilizing the rolling diaphragm principle. This unique structure allows the dynamic valves to discharge air from the water system in a controlled and gradual manner, preventing slam and local up-surges. When vacuum occurs, the valves fast reaction will draw in large volumes of air into the water system, impeding down-surges and, consequently, all pressure surges in the line. The valves are normally closed when the line is not operating, thus preventing the infiltration of foreign particles and insects into the water system.
Application Range
-
Water transmission
-
Water distribution
-
Pump suction line
-
Peaks points on pipeline
-
Next to by-pass valve
Related Products
-
V151 Gate Valve Resilient Seated
-
V106 Butterfly Valve Flanged
-
V251 Dismantling Joint
Air Release Valve Product Features
-
Float parts made of polyethylene, increase the corrosion resistance, hence increases service life.
-
The polyethylene floats gives advantage for easier replacement.
-
Ductile iron body increases the resistance against impacts.
-
It is necessary to use air release valves on the peak points of the pipelines, in order to maintain the full flow of the water.
-
If the air vacuum via air release valve is less than the discharged water amount, the pipeline will face the risk of torsion.
-
Fully coated body and bonnet, meets the hygienic requirements of the potable water networks. (WRAS coating optional)
-
Double orifice air release valve is installed on the pipe by a flange, release the air received from its outlet through the orifices located above the float parts.
-
When the air release function is completed, the floats travel upper part with the water force and close the orifice outlet, thus preventing the leakage of water.
-
Flange connections according to EN1092-2/ISO 7005-2. Working pressure range from 0.2 to 16 bar.
-
Hydrostatic test pressure for seat: PN x 1.1 , for shell: PN x 1.5 according to EN 12266-1.